December 2025 Product Focus: Low Slope Roofing
Peel & Seal
MFM Building Products
Peel & Seal, manufactured by MFM Building Products, is a tough, dependable low-slope roofing membrane that can be left exposed to the elements indefinitely. It is the ideal solution for sunrooms, enclosed patios, mobile homes, outbuildings or anywhere a dependable waterproofing membrane is needed. The self-stick properties make installation quick and easy. A sharp utility knife and hand roller are the only tools needed. Peel & Seal is available in four colors and seven width choices. Slit sizes are perfect for flashing any exterior penetration, such as chimneys, skylights and vents. Comes with a 10-year warranty and is made in the USA. For more information, visit mfmbp.com.
Photo: Georgia-Pacific
DensDeck ProFast
Georgia-Pacific
DensDeck ProFast Prime Roof Board is a 3/8-inch cutting-edge gypsum-based cover board engineered to enhance roofing installation efficiency. In testing conducted to date, the use of DensDeck ProFast Prime Roof Boards in single-ply (hybrid) assemblies has shown a 25% to 75% reduction in the number of fasteners required — which can help to lower material costs and optimize project budget and profit margins. The board is approximately 20% lighter than DensDeck Prime Roof Board, offering greater ease of handling and installation on the job site with no compromise in strength and durability. You can fit approximately 25% more on a truck, which can help reduce transportation costs/streamline your supply chain. For more information, visit buildgp.com.
Photo: Rocky Mountain Snow Guards
Single Ply II: 2-Pipe Fence-Style Bolt-Down System
Rocky Mountain Snow Guards
Ideal for snow retention on low slope roofing, Single Ply II: 2-Pipe Fence-Style Bolt-Down systems from Rocky Mountain Snow Guards are comprised of two base components. First, a 2-pipe upright bracket that’s 6 inches tall made of mill finish or powder-coated aluminum. Second, a single-ply baseplate made of galvanneal steel. Aluminum 1-inch OD tubing fits in the brackets in the Fence-Style snow retention systems to retain heavy snow loads from sliding off low-slope roofing. The snow retention system allows the snow to melt naturally, minimizing the possibility of a catastrophic release of snow from low-sloped roofs. For more information, visit rockymountainsnowguards.com.
Photo: SOPREMA
ALSAN RS 260 LO
SOPREMA
In roofing, speed and precision often make the difference between a good job and a great one. ALSAN RS 260 LO offers contractors a low-odor, rapid-curing solution that’s especially useful for jobs with tight timelines or sensitive environments. Reinforced with SOPREMA’s proprietary ALSAN RS Fleece, the system forms a seamless, durable membrane that adapts easily to complex roof details. Seasonal formulations keep crews productive year-round, and its brush or roller application simplifies installation without sacrificing performance. For contractors who value efficiency and reliability, ALSAN RS 260 LO is a practical choice that helps meet project demands while maintaining high standards of workmanship.
For more information, visit soprema.us.
Photo: MuleHide
Self-Adhering Modified Bitumen Cap Sheets
MuleHide
Self-adhering modified bitumen cap sheets from MuleHide go on quickly, clean and torch-free. The premium-quality polyester-reinforced membranes also meet the toughest code requirements, delivering years of waterproof, weather-tight, hassle-free performance. The sheets have an aggressive pressure-sensitive adhesive on the bottom and an APP or SBS weathering surface on top. Simply position the membrane, let it relax, peel away the release liner, press the sheet into place and roll it. No fumes or hot asphalt. No risk of fire. FASTLap granule-free end laps provide faster, stronger seams. SEALLap Ultra granule-free selvage edges have a self-adhesive compound for an immediate monolithic seam. For more information, visit mulehide.com.
Photo: FlashCo
Retrofit Roof Drains
FlashCo
FlashCo’s Retrofit Roof Drains are designed to maximize flow with no obstructions in the throat and require no maintenance. The time-saving design comes ready to install with a pre-attached membrane, and no tools are required for installation. FlashCo Retrofit Drains are available for TPO, or PVC in FlashCo’s standard colors. Five common sizes are ready to ship and fit standard 2-inch to 6-inch drainpipes installed during original construction. Each unit is inspected and tested before shipping from one of our 10 convenient production facilities across the U.S. For more information, visit flashco.com.
Photo: Owens Corning
DeckSeal Self-Adhered Roofing System
Owens Corning
The Owens Corning DeckSeal Self-Adhered Roofing System offers a convenient, high-performance solution for low-slope (1/4:12 to 2:12 pitch) residential roofing applications such as additions, garages and porches. The two or three-ply system features a Dual Compound Formulation with excellent granule adhesion and a back coat providing aggressive adhesion to the substrate, plus a granule-free selvage edge on both side and end laps. It comes in attractive colors to complement popular shingle offerings and offers peace of mind from warranties* on both shingles and DeckSeal components from Owens Corning.
*See actual warranty for complete details, limitations, and requirements.
For more information, visit
owenscorning.com.
Looking for a reprint of this article?
From high-res PDFs to custom plaques, order your copy today!
