S-5! Introduces its Newest WindClamp Technology

s-5-windclamp-2x — Photo courtesy of S-5!.

COLORADO SPRINGS, Colo. — S-5! introduces the newest addition to its line of WindClamps™, designed to increase wind resistance for standing seam and other concealed-fastened metal roofs.

The new WindClamp2X, as with all S-5!’s WindClamps, are small aluminum clamps placed over the roof’s seam at designated intervals to prevent male-to-female seam separation and/or seam separation from the roof’s mounting clip. S-5! WindClamps are a cost-compelling alternative for new construction and can also be used in retrofit applications to bring older roofs into compliance with current codes and wind standards.

Attaching these simple, yet highly-tested clamps to a roof’s seams have proven to dramatically improve wind uplift performance for more than 25 years. S-5! WindClamps increase — and often double — wind resistance, preventing multiple modes of failure, including seam separation and clip disengagement when used at roof clip locations. This clamp-to-seam technology has been a highly cost-effective solution to preserve rooftops in some geographic regions and/or roof “zones” with increased probability of extreme wind uplift conditions.

S-5! now offers three WindClamp solutions for a variety of roof profiles:

WindClamp DL, designed for MBCI Double-Lok and licensees
WindClamp UD, designed for MBCI Ultra-Dek and licensees
New WindClamp2X, designed for other specific double-folded standing seams, i.e., Butler MR-24 and Varco Pruden SSR

“The magic is not in a generic ‘seam clamp,’ or in a seam clamp that ‘fits okay’ or ‘fits’ multiple seam profiles,” said S-5! CEO and founder, Rob Haddock who has served on ASTM committees for wind testing and standardization. “The magic is in knowing how to design a seam clamp for this purpose and for a specific panel profile. S-5! WindClamps can increase strength by 100, 200 or even 300% with test protocols to prove it. We understand how to design these clamps because our team has the in-depth knowledge and experience of how the total roof assembly responds to wind uplift.”

For more information, visit www.s-5.com.