Since fiberglass does not absorb moisture, PINK fiberglass from Owens Corning, Toledo, Ohio, will not hold water, thereby resisting any permanent loss of R-value. Plus, when properly installed, it will
Insulation removal vacuums from Wm. W. Meyer & Sons Inc., a company located in Skokie, Ill., are designed for fast removal of all blown-in insulation products. Whether you’re recycling cellulose
The Retro Shield System, created by Fi-Foil Co., Auburndale, Fla., is designed for retrofitting and upgrading insulation systems in existing metal buildings. The system incorporates Fi-Foil’s RBI Shield, a reflective
Radiant heat transfer into and out of roofs and attics is a leading cause of costly heat gain and loss. A low-e latex paint, Radiance Low-e Attic and Decking Barrier
GG266 from TVM Building Products, Erin, Ontario, is a single component, non-slumping 100 percent silicone intumescent sealant designed for combustible service penetrations in fire-rated walls and floors. Silicone composition exhibits
Fire-blocking products work by creating a thermal barrier, temporarily containing the fire, allowing fire fighters more time to extinguish it. The FireLock line of non-combustible caulks and fillers from BDA
The Icynene Insulation System is a spray-in-place light density foam insulation. It is designed to completely air seal the building envelope against air movement, reduce air-borne sound and increase energy
Classic Products Inc., Piqua, Ohio, offers H-R Heat Barrier metal roofing finishes for aluminum and steel. The finishes have been tested to generate temperature reductions of 50 degrees or more
RSS