The LadderPro medium-duty telescoping plank from Louisville Ladder Inc. is available in 13-, 16-, and 19-foot full extension sizes. The plank is manufactured with heavy-wall aluminum tubing to prevent common twisting and flexing. Its built-in, skid-resistant surface reduces slipping and the product stores and transports in approximately half of its fully extended length.
Grabber Scaffolding is engineered with a patented peg double redundancy system for safety. The scaffolding is easy to set up and tear down and can be configured for almost any job. The product features over-center locking system casters, has a maximum capacity of 1,000 pounds and is available with in 4-, 6- and 8-foot lengths.
The Alum-A-Pole Corp.’s scaffolding system exceeds OSHA standards and is laboratory load tested in excess of 5,000 pounds. It features a lifetime non-slip, non-wear, replacement warranty and has been job-tested up to 25 years. Available in 6-, 12-, 18-, and 24-foot lengths, its poles are made from special structural aluminum that is permanently mated to Saf-T-Grip rubber.
The Hydro Mobile P-Series mast-climbing work platform is designed for small jobs between 15 and 100 feet high. At 28 feet in length, its innovative hydraulic system features a high load capacity of 6,000 pounds. The portable climbing platform can fit in a 36-inch opening, and it easily sets up in 45 minutes.
The 10-foot by 24-foot Hatch Ladder Deck from Falcon Ladder & Scaffold Mfg. allows roofers to climb from one level to the next safely. Designed to be used on a 6-foot, 6-inch Walk Thru Frame, it features a load capacity of 75 pounds per square foot. It has a heavy-duty aluminum 2.5-inch ladder step and side rail, and ladders can be locked underneath it for easy access and transportation.
Roofmaster Products Co.’s Hoisting Wheel model 541200 is designed to safely and securely lift materials and equipment on to scaffolding systems. It has a heavy-duty forged swivel hook with a safety clip that easily attaches to a scaffolding hanger or hoisting wheel bracket.
The
Gable Master from Roof Mates Inc. allows scaffolding to be set up on pitched
roofs using pump jack poles. The product’s four-square-foot platform provides a
level surface to which the poles are secured. It also holds and stabilizes
ladders regardless of the direction they face on the platform.
The
Granite Scaffold line of scaffolding from Granite Industries Inc. features
high-strength steel tubing frames finished in UV-resistant powder coating. The
scaffold tower features Steelhead walkboard with a patented hook design and a
clip to prevent wind uplift.
The Versalift 600 material handling system from Garlock Equipment Co. can be set up in as little as 15 minutes without CDL crane drivers, special conveyor transit permits or hydraulic hoists.
RSS