Building on the success of the revolutionary GLL2-80 360-degree line laser earlier this year, Bosch Measuring Tools introduces the GLL3-80 3-Plane Hybrid Line Laser. 

Building on the success of the revolutionary GLL2-80 360-degree line laser earlier this year, Bosch Measuring Tools introduces the GLL3-80 3-Plane Hybrid Line Laser. The new laser is nearly identical to the GLL2-80, except the GLL3-80 utilizes an additional laser diode to deliver full 360-degree coverage on two perpendicular vertical planes and one horizontal plane. By providing five cross points and self-leveling lines in 360 degrees, the GLL3-80 makes layout, leveling and squaring a breeze for cabinet installers, finish carpenters, remodelers, electricians and others. Unlike traditional cross line lasers, the GLL3-80 allows the operator to position the unit over one reference mark and provide two 90-degree layout lines from one setup point. Because the GLL3-80 projects in three axis planes simultaneously, and the tool can be quickly switched between triple axis-plane, vertical-only and horizontal-only modes, the user can complete an entire room from a single setup point. Like the GLL2-80, the GLL3-80 utilizes Bosch patented Cone Mirror Technology, rather than rotating diodes, to project bright laser “chalk lines” in 360 degrees. By reducing the number of moving parts, Bosch produced a laser layout tool that is more compact, lighter, easier to calibrate, and simpler to use than a traditional rotary laser. For more information, call 877-BOSCH-99 or visit www.boschtools.com.