Church Roof Achieves Slate Look With Premium Shingles

A prerequisite for installing a new roof on a Lapeer, Mich., church with a 24/12 pitch was that the finished product had to be spectacular, according to Ron Turkus, president of Roof Technologies Inc.

The St. Paul Lutheran Church roof installation took approximately 31/2 weeks to complete.


A  prerequisite for installing a new roof on a Lapeer, Mich., church with a 24/12 pitch was that the finished product had to be spectacular, according to Ron Turkus, president of Roof Technologies Inc.

“The roof system had to be stunning,” Turkus said. “A building with a 24/12 pitch roofline simply demanded it.”

The goal was to capture the look of a slate roof with a premium laminated shingle, and what transpired over a summer of installation achieved a stunning result that did not exceed the church’s budget.

A prerequisite for installing a new roof on a church with a 24/12-pitch roofline was that the finished product be spectacular.

Project Startup

Ron Turkus has been in the roofing business since 1980 when he started out as an industrial and commercial sales representative for a mid-Michigan roofing company. In 2003, Turkus established Roofing Technologies Inc. of Okemos, Mich., a suburb of Lansing. His experience prepared Turkus for installing his most prominent slate-look project to date at a Lapeer church located north of Detroit in Genesee County.

Turkus said he first met with officials from St. Paul Lutheran Church of Lapeer in early 2007. “The agreement was signed in June 2007 and the project started just after the Fourth of July holiday,” Turkus recalled.

A side photo of St. Paul Lutheran Church of Lapeer, Mich., shows the CertainTeed Centennial Slate shingles, which are multi-layered laminated shingle designed to replicate blended slate.

The project included the installation of two layers of 2-inch thick polyisocyanurate insulation, a vented air space, and one-half-inch OSB (oriented strand board).

Roofing Technologies then installed 200 squares of CertainTeed Centennial Slate™ luxury shingles. Centennial Slate is a multi-layered laminated shingle designed to replicate blended slate. Specifications required Turkus to obtain a Sure Start Plus/5 Star coverage warranty.

“The five-member church roof committee was trying to achieve several goals,” Turkus said. “First of all, they wanted to increase the R-value of the roof system because the existing system had little R-value. The next consideration was that the roof system had to be durable and long lasting. The previous roof system lasted only 15 years.”

Roofing Technologies Inc. installed 200 squares of CertainTeed Centennial Slate shingles.

Turkus said the final consideration was the roof system had to have a striking appearance - something people would notice from the street. The slate look fit the bill perfectly, at a fraction of the cost of real slate. “The custom copper ridge vent, I think, topped off the sanctuary roof perfectly,” Turkus said.

The St. Paul Lutheran Church roof installation took approximately 31/2 weeks to complete. “The whole project, which included extensive sheet metal work, took quite a bit longer,” Turkus said. “The roof slope started with less than a 3/12 pitch at the eave, and after approximately 14 feet was at the 24/12-pitch.”

CertainTeed WinterGuard Waterproofing Underlayment was used on the entire low-sloped area, and CertainTeed Roofer’s Select high-performance underlayment was used on the steep-sloped area, Turkus said.

Here is the peak of St. Paul Lutheran Church of Lapeer, Mich., which required installation of 200 squares of CertainTeed Centennial Slate shingles.

“The job was about 20,000 square feet of roof area, which included the sanctuary and the school gymnasium,” Turkus said. “The roof was loaded with a Skytrack, which was on an as-needed basis. With this kind of slope there was really no place to put anything.”

With its prominent, steep slope roof, St. Paul Lutheran Church of Lapeer, Mich., demanded a stunning roof system.

The steep-sloped area required the roofers wear full safety harnesses.

“The biggest challenge of this job was to get the job done in a timely, yet safe manner,” Turkus said. “The foreman of the shingle crew, subcontractor Ramon Rosas of Regional Roofing Services, achieved that goal without a problem in four working days on the steep sanctuary roof.”
Tom Watts is the associate editor of Roofing Contractor. He can be reached at 248-244-1738 or wattst@bnpmedia.com.

Recent Articles by Tom Watts

You must register or login in order to post comments.

Multimedia

Videos

Image Galleries

Best of Success 2011

The seventh Roofing Contractor Best of Success Conference was held in Clearwater Beach, Fla., Sept. 26-27, and the event once again set records for the number of attendees and the number of sponsors. More than 255 roofing professionals converged at the Sandpearl Resort to attend the two-day conference, network, and share ideas. Photos by Angel Prado.

Podcasts

It Was an Interesting Week
Damato of the Day Is ... "It Was an Interesting Week" -  August 15, 2011
More Podcasts

THE MAGAZINE

Roofing Contractor Magazine

feb 12

February 2012

Come check out the February 2012 issue of Roofing Contractor Magazine!
TABLE OF CONTENTS SUBSCRIBE

Roofing Contractor STORE

Roofing_Construction_&_Esti.gif
Roofing Construction & Estimating

Covers sheathing and underlayment techniques, as well as secrets for installing leakproof valleys. Many estimating tips help you minimize waste, as well as insure a profit on every job.

More Products

Clear Seas Research

Clear Seas ResearchWith access to over one million professionals and more than 60 industry-specific publications,Clear Seas Research offers relevant insights from those who know your industry best. Let us customize a market research solution that exceeds your marketing goals.

Best of Success

Best of SuccessTake Your Roofing Skills to the Next Level! Learn new and improved ways to run your roofing business. Click here to read more about Best of Success!

STAY CONNECTED

Roofing Contractor's Facebook Page Twitter Linked IN