DynaSet 1K is a one-part, solvent-free, moisture-curing adhesive designed to install JM SBS membranes. DynaSet 1K is available in a 5-gallon pail (45lbs). It can be installed using traditional, cold adhesive application methods or can be applied in a ribbon application to allow for venting moisture below SBS vapor retarders in bituminous and single-ply systems. The moisture-cure properties provide excellent green strength and a quick set-up during install, and potential ambient moisture in concrete decks will not adversely impact the adhesive’s properties. This allows the contractor to better set schedules with a lower risk of variable measurements of moisture in the concrete that can cause project delays.